Best Selling

The Impact M3 once again redefines this high standard with ground breaking advancements, upgrades, and a sole unwavering focus on creating the most advanced, most accurate, and most capable airgun you’ll ever shoulder. The improvement within the M3 start with its dual regulators. The 1st regulator pre-reduces the air pressure in preparation for the 2nd regulator. This provides less stress on the 2nd regulator and achieves a more constant output pressure with less standard deviations.

From humble beginnings in our founder’s garage over 40 years ago, Hawke has become a world leader in sport optics. Headquartered in the United Kingdom with a presence in over 60 countries and expanding to the United States in 2007, we are still a family-run business today. Nitrogen purged. Shockproof. Waterproof. Fog proof.

ELD® Match (Extremely Low Drag Match) bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield® tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet to bullet, lot to lot.

Bullet Comparator Inserts are designed for use with the Lock-N-Load® Bullet Comparator; it eliminates variables when measuring the over-all length of a bullet. Bullet length can vary a few thousandths due to material variation and tip finish. The Lock-N-Load® Bullet Comparator Inserts allow the reloader to measure the bullet from the base to a specific point on the ogive, which has little variation, if any. This versatile system also provides the reloader with a much more consistent way to monitor the overall length of their reloads, allowing the reloader to build more precision into their handloads, that translates into better groups at the range and more meat in the freezer.

The Matrix Chassis is the most revolutionary chassis ever produced. With the multitude of configurations in grips, thumb rests and trigger finger supports, the primary interface between the shooter and the rifle (the grip) has over 100 different options. (Please refer to the photos above to see our data on shooter preference on the grips, thumb rests, and trigger finger supports). The location of the shooters hand – closer to the bore of the rifle – provides even more variety on how the shooter can set up the chassis. We have developed a hand measurement chart to help identify which grip configuration may work best for each individual.

The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night. This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in front of the Digexs objective lens focus ring for instant switching. Available in two models; the Digex C50 without an IR Illuminator, and the Digex C50 with IR (X850S) Illuminator. Please note that the Digex X850S IR Illuminator is also available for purchase as a separate accessory. Digex C50 models are also backwards compatible with X850 & X940 IR Illuminators (see individual products for more details).

The TIER-ONE FTR Carbon Bipod has ultra rigid Carbon Fibre legs that have unparalleled strength to weight ratio, with a height adjustable range of 175mm-315mm to the underside of the rifles stock, and a maximum footprint of 660mm. It is by utilising this high tech material the FTR Carbon Bipod has a footprint wider than its competitors for a minimal weight penalty. Manufactured from Carbon Fibre and Aluminium, the FTR Carbon Bipod retains strength and integrity despite only weighing in at a class leading 550g (not including adapter). Mil-Spec hard-coat anodised to 30 microns in satin grey to withstand years of use completes the package. Tested and recommended for up to 50cal.

Tipton Universal Bore Guide PRODUCT DESCRIPTION Universal Bore Guide The Tipton Universal Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to bow and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily. Anodized aluminum tube for durability Fits most bolt action rifles and AR-15s Bolt Action Collar slides back and forth along tube to insure a secure fit then rotates down and locks into the bolt catch slot on the stock Integrated bore solvent port allows you to add solvent after you have inserted the patch

A truly unique, attention-getting CO? pistol. First there are the viewports in the heavy slide, through which you can see the brass-colored barrel with thread for mounting a compensator. But what’s totally new is the removable magazine, which holds the CO? cartridge along with three spare clips. The pistol can shoot both pellets and BBs, even mixed. The metal slide brings the weight up to almost a kilogram.

ANSCHÜTZ target rifles are famous for their solid design, functionability and unsurpassed performance all around the world. The ANSCHÜTZ 54 match cylinder action which is also part of the ANSCHÜTZ hunting repeaters dominates national, international, Olympic and world championship competitions in the small bore rifle disciplines. Buying such a hunting repeater does not only mean to acquire state-of-the-art technology but also a master piece in a class of its own.

PREMIER ELITE The new Premier Elite is designed for the most demanding competition shooters. Equipped with the MDT ACC Elite stock, TriggerTech Diamond trigger and Bergara profile 7 competition barrel, it offers unmatched performance and accuracy. A quality tool that will take shooters all the way to the podium.

MDT AICS-pattern metal magazines are manufactured from high strength steel, nitride-finished and coated with Cerakote Elite for ultimate durability and performance.  These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard. The 308 based AICS magazines are available with or without the front binder plate. See details below for benefits and limitations of each version.

One of the most popular .22LR rifles in the UK - the M&P 15-22 is a versatile lightweight Semi-Auto available in numerous specifications. The M&P15-22 SPORT features a 10-inch M&P slim handguard that incorporates the popular Magpul M-LOK™ system. The M-LOK system allows rifle owners to easily customize their M&P15-22 SPORT by adding accessories without removing the handguard.

Based from an iconic design this .22LR rimfire semi-auto is renowned not only for it’s looks but also it’s reliability. The collapsible stock with included magazine holder, provides the user with variable adjustments and with the picatinny rail system allows for a multitude of aftermarket accessories. With ambidextrous charging handle, 22 round magazine capacity and a full length top receiver picatinny rail the 16 is the ideal firearm for every shooters plinking needs.

Medium-weight, accurate hunting pellet for medium ranges. High impact and penetration. Aerodynamic design through metal tip. Controlled expansion. Smooth with brass tip.