• display as grid Grid
  • display as list List

no image available
Our Price £54.05 inc VAT
£45.04 ex VAT
no image available
Our Price £54.05 inc VAT
£45.04 ex VAT

no image available
Our Price £85.95 inc VAT
£71.63 ex VAT
Hoppe's 9 Rifle Boresnake
Hoppe's 9 Rifle Boresnake
Hoppe's BoreSnake is now available with a convenient storage solution. The original one-pass bore cleaning tool has a new case, the BoreSnake Den, with a lid that doubles as a pull handle. Available in fourteen rifle calibers. The original fastest bore cleaning tool on the planet has a new home. Hoppe's BoreSnake Den is a compact carrying case with a built-in handle for easy storage between firearm cleanings. It conveniently fits in a range bag or backpack to protect your BoreSnake brushes during transport. The lid of the Snake Den doubles as a convenient pull handle that snaps into the clear case for storage. A one pass solution, BoreSnake uses an integrated bronze brush to scrub out carbon fouling, while the tail clears the barrel of loose debris with a surface area 160x larger than a standard patch.
Our Price £16.95 inc VAT
£14.13 ex VAT

no image available
Tipton Cleaning Patches
New
Tipton Cleaning Patches
Square 100% cotton flannel patches. Precisely cut to the correct size for use with Tipton jag. When used with slotted tip, choose the next size larger for optimum performance. 
Our Price from £5.99 inc VAT
£4.99 ex VAT

Tipton Deluxe Carbon Fiber Cleaning Rod
New
Tipton Deluxe Carbon Fiber Cleaning Rod
Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if they’re used carelessly – though they won’t pick up potentially damaging small abrasive particles. “Coated” rods get part of the job done – they keep the stainless steel shaft from damaging your barrel’s rifling, but the coating will pick up small abrasive particles, which means you’re effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber can’t scratch your bore like stainless steel, and they won’t embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods “deluxe” because they feature an ergonomically designed handle that spins on two sets of ball bearings – the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The “shank-through” construction also allows the user to apply “reasonable” hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16″-27.
Our Price from £51.99 inc VAT
£43.33 ex VAT
Tipton Max Force Cleaning Rod
New
Tipton Max Force Cleaning Rod
Tired of bending or breaking your small diameter cleaning rods? The answer is here: Tipton’s® MAX Force™ Cleaning Rod. Tipton has created a cleaning rod with a patent pending sliding handle. Now you can put the force you need right next to the bottle neck section you need it applied to. The sliding handle still allows the rod to rotate freely even while clamped down.
Our Price £71.99 inc VAT
£59.99 ex VAT

Tipton Nope RopesTipton Nope Ropes
New
Tipton Nope Ropes
Durable Pull-Through Bore Cleaning Ropes. Get a single rope or a pack of 2. Attachable ends allow user to continuously clean without re-feeding end into barrel with each pass. Convenient mess-free storage box. Say nope to carbon, copper, debris, grime and rust.
Our Price from £10.99 inc VAT
£9.16 ex VAT
Tipton Patch Trap
New
Tipton Patch Trap
Cleaning the barrel on your rifle, shotgun or muzzleloader can be a messy choir. Solvent splatter, drips and dirty patches always seem to end up where you dont want them. Strong solvents and powder residue can stain clothes and work surfaces. The Tipton Patch Trap puts an end to the mess.
Our Price £13.99 inc VAT
£11.66 ex VAT

Tipton Rapid Deluxe Bore Guide Kit
New
Tipton Rapid Deluxe Bore Guide Kit
The Tipton® RAPID™ Deluxe Bore Guide Kit contains several great tools that ensure the safest, easiest, and most effective cleaning possible. The RAPID Deluxe Bore Guide Kit allows you to easily align and secure a patch for solvent application, then holds it with the correct amount of tension for perfect jag penetration. When the rod is pushed into the RAPID, it automatically releases the patch. It also keeps harmful solvents off your gun’s finish in the process. A bore guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge the chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it properly directs the force exerted on the cleaning rod handle, allowing tight patches to be pushed safer and easier.
Our Price £43.99 inc VAT
£36.66 ex VAT
Tipton Rod Rack
New
Tipton Rod Rack
Want to organize and keep all your cleaning rods handy? The Tipton® Cleaning Rod Rack will hold a wide variety of cleaning rods in various shapes and sizes. The Cleaning Rod Rack accommodates up to six rods and has hanging hooks on either end for additional accessories. The Rod Rack even has molded in bumpers designed for securing t-handle rods. The Cleaning Rod Rack is constructed of a durable molded material and comes with mounting holes and screws.
Our Price £10.99 inc VAT
£9.16 ex VAT

Tipton Ultra Cleaning Kit
New
Tipton Ultra Cleaning Kit
The Tipton® Ultra Cleaning Kit was designed for the shooter who wants the absolute highest quality cleaning accessories available in one convenient portable kit. The heart of the kit is a Premium 3 Piece Stainless Steel Cleaning Rod with a multi-bearing handle. The .205” diameter, 40” usable length rod is constructed of 17-4 PH stainless to be extremely durable and resist taking a bend (the problem that plagues most multi-section rods). All the kit components are neatly contained in the molded plastic case with custom die cut foam for organization. For use with .22 Cal and larger rifles.
Our Price £211.99 inc VAT
£176.66 ex VAT
Tipton Universal Bore Guide Kit
New
Tipton Universal Bore Guide Kit
The Tipton® Universal Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.
Our Price £19.99 inc VAT
£16.66 ex VAT

Wheeler 17-Piece Upgrade Set
New
Our Price £61.99 inc VAT
£51.66 ex VAT
Wheeler 21-Piece Expansion Set
New
Wheeler 21-Piece Expansion Set
Set includes: ½” x ¼” socket driver, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm and 8mm Hex Bits. T6, T7, T9, T10, T15, T20, T27 and T30 Torx Bits.
Our Price £22.99 inc VAT
£19.16 ex VAT

Wheeler 30-Piece P-Handle Driver Set (Sae/Metric Hex & TORX)
New
Wheeler 30-Piece P-Handle Driver Set (Sae/Metric Hex & TORX)
Complete your workbench with the Wheeler 30-Piece P-Handle Driver Set. The sleek molded stand design paired with its ability to be mounted on the wall allow for quick, convenient access to the SAE Hex, Metric Hex and Torx drivers, making it the perfect addition to any work shop.
Our Price £85.99 inc VAT
£71.66 ex VAT
Wheeler 45-Piece Key Set (Sae/Metric Hex & Torx)
New
Wheeler 45-Piece Key Set (Sae/Metric Hex & Torx)
Store all your key sets in one place with the Wheeler 45-Piece Key Set. This small set takes up little space on your workbench and will allow for you to store all SAE, Metric Hex and Torx Keys together. Never again will you have to dig around for odd or different sizes, simply open your kit, turn to the page you need and continue working.
Our Price £50.99 inc VAT
£42.49 ex VAT

Wheeler Anit-Cant Indicators
New
Wheeler Anit-Cant Indicators
Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope, even just a couple of degrees, can cause error in point of impact. With modern “Drop-Compensating” scopes, an Anti-Cant Indicator is a necessity. The Wheeler® Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical, eliminating any chance for “Cant Error” to cause a miss.
Our Price £54.99 inc VAT
£45.83 ex VAT
Wheeler Level-Level-Level
New
Wheeler Level-Level-Level
The Wheeler Engineering® Level-Level-Level is the simplest, most accurate scope leveling system out there. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable and even make zeroing your firearm a frustrating and costly experience. The Level-Level-Level works because the scope is leveled to your receiver, not to the top of a scope base. This scope mounting level works with practically any bolt-action rifle and is adaptable to there designs as well.
Our Price £30.99 inc VAT
£25.83 ex VAT

Wheeler Micro Multi-Driver Tool Pen
New
Wheeler Micro Multi-Driver Tool Pen
Have the bits you need on hand for your most intricate gunsmithing projects with the Wheeler Micro Multi-Driver Tool Pen. Its convenient shape fits comfortably in your hand and is equipped to hold 5 of your most used bits. The aluminum handle keeps the bits internally and can be changed quickly, by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bits holder to conveniently store up to 12 unused bits. Throw this tool in your range bag and use its precise bits for adjusting your lasergrips or even maintaining your chronograph.
Our Price £39.99 inc VAT
£33.33 ex VAT
Wheeler Multi-Driver Tool Pen
New
Wheeler Multi-Driver Tool Pen
Have the bits you need, on hand, with the Wheeler Multi-Driver Tool Pen. This small tool is perfect for travel. Who wants to drag their entire screwdriver set to the range? This do it all tool makes it so you don't have to. Its convenient shape fits comfortably in your hand and is equipped to hold 6 of your most used bits. The aluminum constructed handle keeps the bits internally and can be changed quickly, by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bits holder to conveniently store up to 7 unused bits.  
Our Price £39.99 inc VAT
£33.33 ex VAT

Wheeler Precision Micro Set
New
Wheeler Precision Micro Set
SPECS: 58-piece micro screwdriver set. VERSATILE: 5 3/4" flexible extension shaft for hard to reach places. INCLUDES: Extendable handle from 3-3/4" to 5-1/2". DURABLE: Chrome plated steel bits. CONVENIENT: Organized storage case included
Our Price £34.99 inc VAT
£29.16 ex VAT
Wheeler Professional Reticle Leveling System
New
Wheeler Professional Reticle Leveling System
The Wheeler Engineering® Professional Reticle Leveling System (PRLS) is a precision tool designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjustment calibration set screws, anodized aluminum construction and a protective molded case put the PRLS in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the gun's barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point, the Barrel Clamp Level is calibrated to the guns axis. The scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
Our Price £79.99 inc VAT
£66.66 ex VAT

Wheeler Space Saver Gunsmithing Set
New
Wheeler Space Saver Gunsmithing Set
Less than half the size of comparable gunsmithing screwdriver sets. Magnetic hollow handle perfectly sized for gunsmithing needs and to carry a variety of bits should the need arise. A great accessory to have on hand for general firearm maintenance or gunsmithing. Includes 26 bits chosen to meet most gunsmithing needs. Includes Phillips, Hex and Torx bits
Our Price £21.99 inc VAT
£18.33 ex VAT