Cleaning & Repairing: Page 2

This maximum strength firearm cleaner/degreaser is used for the most demanding of metal cleaning tasks. It helps to reduce the probability of mechanism failure due to contaminate build up. This quick evaporating solvent liquifies and eliminates carbon fouling. It is extremely economical and efficient, helping to keep all parts of your shotgun or firearms clean. Suitable for: Firearm actions Magazines Choke...

  Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

Square 100% cotton flannel patches. Precisely cut to the correct size for use with Tipton jag. When used with slotted tip, choose the next size larger for optimum performance. 

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if they’re used carelessly – though they won’t pick up potentially damaging small abrasive particles. “Coated” rods get part of the job done – they keep the stainless steel shaft from damaging your barrel’s rifling, but the coating will pick up small abrasive particles, which means you’re effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber can’t scratch your bore like stainless steel, and they won’t embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods “deluxe” because they feature an ergonomically designed handle that spins on two sets of ball bearings – the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The “shank-through” construction also allows the user to apply “reasonable” hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16″-27.

Want to organize and keep all your cleaning rods handy? The Tipton® Cleaning Rod Rack will hold a wide variety of cleaning rods in various shapes and sizes. The Cleaning Rod Rack accommodates up to six rods and has hanging hooks on either end for additional accessories. The Rod Rack even has molded in bumpers designed for securing t-handle rods. The Cleaning Rod Rack is constructed of a durable molded material and comes with mounting holes and screws.

The Tipton® Universal Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.

Set includes: ½” x ¼” socket driver, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm and 8mm Hex Bits. T6, T7, T9, T10, T15, T20, T27 and T30 Torx Bits.

Store all your key sets in one place with the Wheeler 45-Piece Key Set. This small set takes up little space on your workbench and will allow for you to store all SAE, Metric Hex and Torx Keys together. Never again will you have to dig around for odd or different sizes, simply open your kit, turn to the page you need and continue working.

The Wheeler Engineering® Level-Level-Level is the simplest, most accurate scope leveling system out there. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable and even make zeroing your firearm a frustrating and costly experience. The Level-Level-Level works because the scope is leveled to your receiver, not to the top of a scope base. This scope mounting level works with practically any bolt-action rifle and is adaptable to there designs as well.

Have the bits you need, on hand, with the Wheeler Multi-Driver Tool Pen. This small tool is perfect for travel. Who wants to drag their entire screwdriver set to the range? This do it all tool makes it so you don't have to. Its convenient shape fits comfortably in your hand and is equipped to hold 6 of your most used bits. The aluminum constructed handle keeps the bits internally and can be changed quickly, by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bits holder to conveniently store up to 7 unused bits.  

The Wheeler Engineering® Professional Reticle Leveling System (PRLS) is a precision tool designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjustment calibration set screws, anodized aluminum construction and a protective molded case put the PRLS in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the gun's barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point, the Barrel Clamp Level is calibrated to the guns axis. The scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.