Mounts & Rails

Made in true mil spec picatinny, this rail allows for a firm lock onto your rail's dovetail. Six grub screws pull the rail up, locking it tightly into place.

Made for the Blaser R8, a reversible rail designed to fit onto the top of the Blaser saddle mount (Not provided). Made in true mil spec picatinny, from T6 Aluminium. 0 MOA

Made in true mil spec picatinny, fully reversible, side clamps. Will work as either a forward or rear rail.

The Howa 1500 Mini Action. Our rails allow you to sturdily mount your optic. Made in true mil spec picatinny, this rail allows for a firm lock onto your rifle's action. Attaching with the screws provided.

Made in true mil spec picatinny, this rail allows for a firm lock onto your rifle's action. Supplied with Vibra-Tite, anti vibration threadlock.

The Remington 700 Long Action, popular for decades and still going strong. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA. Made in true mil spec picatinny, with the screws provided this rail locks tightly onto your rifle's action. Supplied with Vibra-Tite, anti vibration threadlock.

Our SAKO 75/85 rails are made to fit over Optilock Bases, giving a secure fit. Available in either a vapour blasted finish or hard anodised black.

Available in 0MOA made in true mil spec picatinny, this rail allows for a firm lock onto your rail's dovetail. Six grub screws pull the rail up, locking it tightly into place. Held in place by four grub screws, for fitting remember it's like a mullet, short in the front and long in the rear. (One 1x6-48x.200 - Front & three 3x6-48x.260 - Rear).

Our Universal Reversible Extended Length Picatinny Rail Centrefire is designed to slide over existing weaver and picatinny bases and rails. With the six screws and eight different holes you will be able to find a sturdy grip as the grub screws lift the rail up and central.  Extending either forward or rear it allows for versatility in mounting your scope as necessary.

MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

The Primary Arms Tall Flip to Side Magnifier Mount with Thumb Screw mount is perfect for placing a magnifier behind all 7mm raised base EOTechs and other high mounted red dots. Once your magnifier is installed in the 30mm ring, simply pulling the magnifier to the rear unlocks the mount, allowing you to instantly choose between centerline and off-centerline positions. This mount places the center of the magnifier 1.75 inches above the top of the 1913 Picatinny rail. This magnifier will ONLY line up with raised base optics!

The Sightmark Tactical 30mm Fixed Cantilever Mount is a fixed mounted riflescope base compatible with 30mm scope tubes. This mount features a two-inch forward offset allowing the use of riflescopes requiring a greater eye relief and more comfortable cheek placement on AR-style rifles. The 30mm fixed mount is constructed of aircraft-grade 6061-T6 aluminum and finished in a matte black, non-reflective coating. Cantilever mounts make transferring your optic easy. This mount is perfect for installing and removing an optic from your firearm without losing zero.