Element Immersive 10x40 Sight

FEATURES & INSTRUCTIONS

• Battery Installation 

  Unscrew the Battery Container Cover (Fig 3, Pos.1) 

  Insert a CR2032 Battery, ensuring the polarity of the battery is correct (“-“side facing out) -Screw the battery container cover back on.

• Operating the Illumination 

  To Activate the Reticle Illumination function, press the Illumination button (Fig.3, Pos.2). Brightness can be adjusted by repeatedly pressing the button. 

  The Illumination level cycles up until the brightest level is reached, then drops back down to  the lowest level. 

  To switch the Illumination function off, press and hold the Illumination button for 3 seconds. 

• Eyepiece - Focusing the Reticle
  Everybody’s eye is different, and the ocular lens will need to be adjusted for your eye in
  order for the reticle to appear in focus.

• Parallax Knob - Focusing the Target
  A well-adjusted parallax is crucial for optimum precision, as it places the reticle in the exact
  same focal plane as the target and “fixes it in place”, eliminating the possibility of parallax
  error. And, of course, it allows you to see your target clearly.

• Adjusting the Turrets
  Your Immersive Series Riflescope will either be an MOA model, or an MRAD (MIL) model.
  These are two different angular units of measurement that are used by precision shooters.
  For in-depth information on these different units, see the guide on page 9. If you have an
  MRAD model, your turrets should read “1 Click = 0.1 MIL”, while MOA models should read “1
  Click = 0.25 MOA”. In simple terms, 1 click on an MOA turret will move the reticle 1/4” at 100
  Yards, and 1 click on an MRAD turret will move the reticle 1cm at 100 Meters.

• Boresighting
  The riflescope is optically zeroed at the factory, so it should be close to center when fitted.
  Even so, it is important to check that you are “on paper” to avoid frustration. Bore-sight your
  rifle to ensure that your reticle is roughly aligned before fine-tuning.

• Fine-Tuning your Zero
  We’ve designed our Immersive Series Riflescopes with reticle and turret units matching
  each other which will make fine-tuning your zero an easy process. You can use your reticle
  to measure your Point of Impact offset from your target, and adjust accordingly.

MORE FEATURES

• up to 4X wider field of view when compared to traditional sights
• only 135mm  long
• focusing down to 6 meters
• ED (Low dispersion) Glass and CNC machined precision mechanics 
• 0.1 mill turrets to match mildot  reticules
• waterproof and nitrogen filled

• Smart MOA adjustable, CNC machined mounts will help to zero the scope and stay in the middle of its adjustment range. Selection of rails to help place the scope in a comfortable position for the users head on any type of gun, from bullpup to a full-length sporter. 

DELIVERY INFO

A delivery cost will be added to your order at checkout and is relevant for standard delivery to England, (parts of) Scotland and Wales (excluding Channel Islands) at £7.95 for 2-3 day delivery. 

PLEASE NOTE: All items deemded as a 'Firearms' or over the standard delivery weight limit (Gun Safes) may have extra charges for delivery. You must enter an RFD (registered firearms dealer) address at the checkout for all firearms orders that are not being collected in store.

Delivery costs to the Highlands and Islands are detailed at the checkout.

Please see full information here

RETURNS/CANCELLATIONS

As detailed in our Terms and Conditions you may cancel your order at any time up to the end of the seventh (7th) day from the date you received the goods. Unless the Goods are faulty (verified by us) or obviously not the goods originally ordered we reserve the right to reclaim all costs incurred by us in recovering them from you and may set such costs off against the amount to be re-credited to your debit or credit card. See more info here

Note: Currently not available for delivery to Ireland, Europe, North America, Australia and New Zealand and R.O.W..

ZERO MY RIFLE