All Accessories: Page 10

  Tipton Bronze Bore Brushes for firearm maintenance. Caliber specific to assure optimum fit to your firearms bore for efficient and thorough cleaning.

Square 100% cotton flannel patches. Precisely cut to the correct size for use with Tipton jag. When used with slotted tip, choose the next size larger for optimum performance. 

Carbon fiber is well-suited to the tough tasks assigned to cleaning rods. It combines the best features of stainless steel and coated cleaning rods, then adds valuable properties of its own. Stainless steel rods can scratch or wear barrels if they’re used carelessly – though they won’t pick up potentially damaging small abrasive particles. “Coated” rods get part of the job done – they keep the stainless steel shaft from damaging your barrel’s rifling, but the coating will pick up small abrasive particles, which means you’re effectively running fine grit sandpaper through your bore. Carbon fiber rods are the best of both: the carbon fiber can’t scratch your bore like stainless steel, and they won’t embed like coated rods. Plus, Carbon Fiber rods can be bent to an extreme degree and return to their original straightness. During Operation Iraqi Freedom, US military armorers called on Tipton to provide cleaning rods that would clean service rifles in demanding conditions. It made sense to us: Carbon fiber is an ideal material for cleaning rods. We call these cleaning rods “deluxe” because they feature an ergonomically designed handle that spins on two sets of ball bearings – the result is a cleaning rod that smoothly follows the rifling both pushing and pulling, even while under pressure. The “shank-through” construction also allows the user to apply “reasonable” hammer blows to the end of the cleaning rod to get a tight patch through a bore. Available in four diameters and six lengths to fit most rifles, pistols, and shotguns. Rifle and handgun rods are threaded for 8-32 accessories, except 17 caliber and 20 caliber rods which are threaded 5-40. Shotgun rods are threaded 5/16″-27.

Want to organize and keep all your cleaning rods handy? The Tipton® Cleaning Rod Rack will hold a wide variety of cleaning rods in various shapes and sizes. The Cleaning Rod Rack accommodates up to six rods and has hanging hooks on either end for additional accessories. The Rod Rack even has molded in bumpers designed for securing t-handle rods. The Cleaning Rod Rack is constructed of a durable molded material and comes with mounting holes and screws.

The Tipton® Ultra Cleaning Kit was designed for the shooter who wants the absolute highest quality cleaning accessories available in one convenient portable kit. The heart of the kit is a Premium 3 Piece Stainless Steel Cleaning Rod with a multi-bearing handle. The .205” diameter, 40” usable length rod is constructed of 17-4 PH stainless to be extremely durable and resist taking a bend (the problem that plagues most multi-section rods). All the kit components are neatly contained in the molded plastic case with custom die cut foam for organization. For use with .22 Cal and larger rifles.

The Tipton® Universal Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to “bow” and rub or gouge the chamber and throat of the bore, causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel, it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.

Set includes: ½” x ¼” socket driver, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm and 8mm Hex Bits. T6, T7, T9, T10, T15, T20, T27 and T30 Torx Bits.