Case Prep: Page 2

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Executive leadership of the Hornady Manufacturing Company has not faltered in the firm’s first 60 years. What was created in 1949 grew sound enough and strong enough to survive the cruel blow of losing the founder 32 years later. Under Steve Hornady’s leadership, and with the active support and involvement of the Hornady family, the business has doubled, and doubled again, and doubled again. In 2006, Jason Hornady, Steve's son, returned to the company as director of sales and is currently vice president. The stature of Hornady Manufacturing Company within its industry has never been higher.

One Shot® Case Lube with DynaGlide Plus® technology is a micro-penetrating high pressure dry film. It contains no petroleum, teflon or other synthetic silicone so it will not contaminate powder or primers.

For those who want to use a high quality paste lube, this non-petroleum product will not contaminate powder or primers.

The RCBS® Case Lube Pad is the best way to lubricate cases for resizing or forming. Coat the pad with Case Lube—2, then roll the case lightly across it. Exactly the right amount of lubricant is transferred to the case. The pad can be removed from the sealable storage case for easy cleaning.

Mounts in place of the cutter to speed the chamfering and deburring process. It also keeps chamfers and deburrs square with the case mouth.

Executive leadership of the Hornady Manufacturing Company has not faltered in the firm’s first 60 years. What was created in 1949 grew sound enough and strong enough to survive the cruel blow of losing the founder 32 years later. Under Steve Hornady’s leadership, and with the active support and involvement of the Hornady family, the business has doubled, and doubled again, and doubled again. In 2006, Jason Hornady, Steve's son, returned to the company as director of sales and is currently vice president. The stature of Hornady Manufacturing Company within its industry has never been higher.

Designed to deburr and uniform flash holes in cartridge cases quickly and easily, this tool uses floating pilots to guide the cutter directly toward the flash hole of the case, resulting in a clean and uniform hole every time.

Speed up your case prep process with the 3-tool capacity and utilize the onboard storage for optional accessories like our primer pocket cleaners, primer pocket reamers, case neck brushes and any other 8-32 thread tools. With three active stations, you can chamfer, deburr and clean primer pockets without having to change tools. The Lock-N-Load® Case Prep Trio comes with both inside and outside chamfer and deburr tools. Made in the U.S.A.

  Many experienced reloaders turn case necks to ensure consistent neck thickness and the most accurate ammunition possible. These caliber specific pilots are required when using the RCBS® Hand Case Neck Turner.

The RCBS® Stuck Case Remover extracts stuck cases from standard sizer dies without damaging the die, using a very simple two-step removal process.