Best Selling

Especially designed for scope shooting. Well-balanced, easy and smooth cocking. Our precision air guns and bolt- action rifles are engineered and manufactured in accordance with the latest sporting arms technology. Perfection and innovation are the aims we live up to. We give priority to ensuring constant development and modification of our products so that they continue to meet the varied demands and requirements of the market. We use tried and tested special materials for construction not only the barrels but also numerous other components.

Note: when the weights are stacked on top of another, the reverse CSK screws must be removed from the weight fitting on the top. And the Stacking Screws / Fasteners should be used to attach to the lower weight. Images beside are for illustration purposes only

Years of research and testing by the Hornady® Ballistic Development Group, combined with advanced manufacturing processes and quality control measures have led to the creation of the ultimate low drag, high performance match bullet.

The Hornady Custom Grade 2-Die set has precise machining that allows accurate reloading by offering easier adjustments, better alignment and smooth functioning. With one of the finest internal finishes in the industry the Custom Grade 2-Die set provides a lifetime of reloading. They are so well crafted that they are guaranteed never to break or wear out from normal use. Includes a full length sizing die and a Bullet seating die.

Bullet Comparator Inserts are designed for use with the Lock-N-Load® Bullet Comparator; it eliminates variables when measuring the over-all length of a bullet. Bullet length can vary a few thousandths due to material variation and tip finish. The Lock-N-Load® Bullet Comparator Inserts allow the reloader to measure the bullet from the base to a specific point on the ogive, which has little variation, if any. This versatile system also provides the reloader with a much more consistent way to monitor the overall length of their reloads, allowing the reloader to build more precision into their handloads, that translates into better groups at the range and more meat in the freezer.

Hornady Lock-N-Load Cartridge Gauges allow the user to check their cases and ammo to ensure a correct fit in SAAMI chambers.

Remove bullets from rifle and pistol cartridges without causing damage while capturing the bullet and powder for reuse. Removes bullets from cartridges without causing damage Captures the bullet and powder for reuse Effective on most rifle or pistol cartridges up to .45 caliber

The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centring, interchangeable bushing for extreme precision in neck sizing.

The Hornady Match Grade Bushing is required for use with the Hornady Neck Sizing die. It is a self-centring, interchangeable bushing for extreme precision in neck sizing.

Executive leadership of the Hornady Manufacturing Company has not faltered in the firm’s first 60 years. What was created in 1949 grew sound enough and strong enough to survive the cruel blow of losing the founder 32 years later. Under Steve Hornady’s leadership, and with the active support and involvement of the Hornady family, the business has doubled, and doubled again, and doubled again. In 2006, Jason Hornady, Steve's son, returned to the company as director of sales and is currently vice president. The stature of Hornady Manufacturing Company within its industry has never been higher.

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.

 Sizes your case neck in the Wilson Neck Die or Wilson Bushing Type Full Length Sizing Die  To figure out what size you need see formula below  Made In the U.S.A.

Lapua 6mm Norma BR – the standard that all other cases are compared to The 6mm Norma BR has become a popular chambering in match rifles used in 300 meter rifle disciplines, specifically benchrest. Lapua’s 6mm BR Norma case is absolutely the best brass in its class and the standard case for benchrest relaoding that all others are compared to.

The Mirage Shield/NV Bridge is a dual purpose, precision machined, add-on accessory for the MDT ACC chassis. While the main purpose of the mirage shield is to help mitigate mirage and maintain a clear view of your target in sustained strings of fire, it also provides the ability for hunters and operators to attach a night vision optic to their system. For competitors, the mirage shield also gives you better available surface to control the front of your rifle, without having to grab a hot barrel.

Norma products are known worldwide for high quality. Cartridge cases are an important factor in this reputation. Superior quality ensures a long life and many reloads. Norma cases are made of the best possible raw materials with the narrowest tolerances, and they deliver accuracy round after round.

Meeting all lead-free hunting regulations, Nosler’s E-Tip™ bullet provides exceptional stopping power and peerless penetration over a broad spectrum of impact velocities, rivaling even the highest quality lead-core bullets. Upon impact, Nosler’s exclusive E² Cavity™ [Energy Expansion Cavity™] allows for immediate and uniform expansion, yet retains 95% weight for improved penetration. The bullet’s boat-tail configuration combined with the streamlined polymer tip assures long-range performance and ease of loading, making it a favorite amongst hand-loaders desiring a lead-free hunting bullet.

RCBS Full-Length die sets are machined from our proprietary die steel to exacting tolerances then undergo a meticulous finishing process to give the hand-loader the best dies on the market. Each Full-Length set includes a Full-Length sizing die and Bullet Seating Die.

This collet is designed be used with the RCBS® Standard Bullet puller to remove bullets from a wide range of cases.

The Universal Hand Priming Tool features a universal case holder and large primer tray.