Grid
List
Once Fired Norma .243 Win Un-primed Brass (100Cases)
Once Fired Norma .243 Win Un-primed Brass (100Cases)
S/H Forster Full Length Size, Micrometer Seating Die & Neck Sizing Die Set 7mm Rem Mag
this set has had little use and comes with the following bushings:
Titanium Nitride: .310
Steel: .304,.306,.308,.309,.310,.311 & .312
ARC Body for ELR Mandrels including cap and locking ring
Expander Mandrel Body for all ARC Expander Mandrels for all ELR calibres from .338 up to .50 BMG
ARC Body for Expander Mandrels (Expanding Cartridge Necks) Includes Cap and Lock Ring
Expander Mandrel Body for all ARC Expander Mandrels for all standard calibres from .20 to .338 Cal
ARC Carbide Mandrel
These are custom ground to size and to order only. Please allow 2-3 weeks for completition. When ordering please contact us to let us know the calibre (up to .338) and the neck tension. The Following neck tensions are available 0.0005" through to 0.004" in 0.0005" steps.
ARC Carbide Primer Pocket Uniformer Tool Large
Expander Mandrel Body for all ARC Expander Mandrels from the smallest .17 Cal right up to the mighty .338 Calibres. Larger calibres will be done using the ELR version.
ARC Carbide Primer Pocket Uniformer Tool Small
Expander Mandrel Body for all ARC Expander Mandrels from the smallest .17 Cal right up to the mighty .338 Calibres. Larger calibres will be done using the ELR version.
ARC De Capper Stem Set
A decapping stem to decap all primers from .17 Cal right up to .338 Cal
ARC ELR Carbide Mandrel
These are custom ground to size and to order only. Please allow 2-3 weeks for completition. When ordering please contact us to let us know the calibre and the neck tension. We can do the following ELR calibres .338 .375 .408 .416 & .50
The Following neck tensions are available 0.0005" through to 0.004" in 0.0005" steps.
ARC ELR Neck Bushing (TiN Coated Steel)
ARC ELR Case Trimmer Neck Bushing (TiN Coated Steel)
.375 CT
408 CT
416 Barret
.460 STE HR
50 BMG and variants
(As image but Steel and TiN
coated)
ARC ELR Stainless TiN Coated Mandrel (.005 increments within .0002 tolerance)
TiN Coated Mandrels with set (ground to finish) sizes for controlling neck tension. The Coating will help with lubeing issues often seen with non coated expanders, we have found that using a little dry lube, such as Redding Imperial Dryneck Lube will further help with use.
ARC ELR Trimmer Cutter (.375 to .50)
ARC ELR Trimmer Cutter (Not Including Pilot)
ARC Neck Bushing (Up to & Inc .33)
Please select the bush you need.
Small for .223 sized cases
Medioum for .308 sized cases
Large for the bigger 30-06 size cases and most Magnums