AR Custom Parts

Barrel Nut Wrench The lugs are designed to fit snugly, with minimum movement, to keep the nut from getting damaged. The outside of the wrench fits nicely inside the stock hand-guard. There are two wrench flats for a 25mm open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble-free use from this barrel nut wrench. Features and Benefits Designed to work with the Smith & Wesson M&P15-22. Lifetime guarantee.

Smith & Wesson M&P 15-22 / AR-15 Carbon Fibre Barrel Shroud (6inch / 152mm or 8inch / 205mm) Note: New versions of this shroud are now in a matte carbon fibre rather than gloss. Please call to check stock. This replacement barrel shroud screws straight on to your Smith and Wesson M&P 15-22 using the industry standard 1/2 inch x 28 UNEF AR-15 thread. Simply unscrew your muzzle brake and screw ours on! Designed by Black Rifle and manufactured locally, these 6" or 8" carbon fibre barrel shrouds capped with a polished or anodised, precision engineered aluminium end-cap are a great upgrade to your Smith & Wesson. The muzzle end-cap features an 11 degree dish to protect the muzzle and assist in efficient gas dispersion. By using the combination of carbon fibre and aluminium our shroud weighs in at just 60g or 65g respectively. Select your chosen end-cap colour and length using the drop down on the right. The 6" shrouds are £45 and the 8" are £48.

Our long awaited premium firing pin is available now! Turned on a precision Swiss lathe from carefully selected high strength steel and then heat treated to our proprietary specifications. Includes one firing pin spring. The back of the pin is profiled to center the hammer impact for longer firing pin life as well as reduced chance of out of battery detonation. Compatible with CMMG style bolts (both conversion and dedicated)

The BoreBuddy bolt buffer prevents the bolt from slamming into the backplate when the rifle is fired. This reduces the noise generated by the cycling of the bolt and reduces wear and tear to the bolt and the lower receiver. When shooting suppressed, a noticeable decrease in sound level has been reported. This bolt buffer is installed by compressing the recoil spring and inserting the rod into the corresponding hole in the buffer and the bolt back plate. The tab on the buffer aligns with the cutout in the bolt back plate. If using a CMMG forward assist adapter, clip the alignment tab off.

The BoreBuddy Recoil spring tuning kit includes recoil springs of the following weights: 3lb (Light – BLUE) 4lb (Medium – YELLOW) 6lb (Heavy – RED) Stock springs vary in strength, but generally are between 4-5lb in recent production bolts. These recoil springs are designed to fit CMMG/Atchisson/Ciener style dedicated bolts and conversion kits.

Designed to considerably improve the speed and efficiency of the AR15/M4 bolt catch, the B.A.D. (Battery Assist Device) Lever quickly addresses reloading and malfunction clearance shortcomings of the platform by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control / ready position with the right-hand trigger finger.  

Next Level Armament ambidextrous S&W M&P 15-22 charging handle is a great-looking upgrade from the factory unit, and is machined from 7075 billet aluminum. The levers on this charging handle are grooved for better grip under all conditions—wet or gloved—and offer quick, fluid motion. M&P15-22 Charging Handle Features Ambidextrous charging handle with matching levers. Grooved levers for better grip under all conditions, wet or gloved. Fewer moving parts than similar charging handles from competitors. Bead-blasted for the least reflective surface possible. Hard coat anodized for years of trouble-free service. Made from 7075 billet aluminum. Made in the USA. Note: Fits only the Smith & Wesson M&P15-22 .22 caliber rifle.

Add a second charge handle to your Black Rifle Universal Red Dot Mount and benefit from true ambidextrous slide charging. Kit contains: 1 x M3 x 12mm Countersunk bolt 1 x Standard Charge Handle This handle is an add-on to the Universal red dot mount. Designed, tested and manufactured in Great Britain.

The Tippmann Arms 12" handguard is a great upgrade to your M4-22. The M-LOK design allows mounting of bipods, grips, lights, lasers and optics.  Free float handguards are known to improve accuracy.  The accuracy of the free-floating handguard comes from the fact that the handguard doesn’t touch the barrel – it is mounted directly to the upper receiver. This allows the barrel to “float” and gives better harmonics, resulting in slightly increased accuracy. Accuracy difference is especially evident when using grips or bipods. When you rest a rifle on a bipod that is attached to the barrel, or a drop-in handguard, the bipod will create force that can slightly warp the barrel. This small amount of warping can provide fairly significant accuracy issues on the range. But with a free-float handguard, you can put all kinds of force on the handguard and it won't affect the barrel whatsoever.

This is a factory original part and is compatible with all Tippmann Arms M4-22 rifles and pistols. 

The Tippmann Arms M4-22 Ambidextrous Selector Switch is constructed from durable steel and features a standard 90-degree throw.  This selector will only fit the Tippmann Arms M4-22 rifles and pistols.