• display as grid Grid
  • display as list List

BT-QK Picatinny Rail Accu-Shot MonopodBT-QK Picatinny Rail Accu-Shot Monopod
BT-QK Picatinny Rail Accu-Shot Monopod
The BT-QK is a Precision Rail Monopod (PRM) with QK Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. 
from £94.99 inc VAT
£79.16 ex VAT
BT-QK Sling Stud Mount Accu-Shot MonopodBT-QK Sling Stud Mount Accu-Shot Monopod
BT-QK Sling Stud Mount Accu-Shot Monopod
The BT-QK is a Sling Stud Mount with Quick Knob. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
from £74.99 inc VAT
£62.49 ex VAT

BT08-QK Accuracy International Accu-Shot MonopodBT08-QK Accuracy International Accu-Shot Monopod
BT08-QK Accuracy International Accu-Shot Monopod
The BT08-QK ASAI Monopod is designed specifically to fit the Accuracy International AE, AW and AICS systems for the original “Legacy” AI style stock sides that have a thumb hole in the buttstock hook. It folds out of the way when not in use. The Knob is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. The Base is 4140 Steel treated with Manganese Phosphate. Available in black only.
£168.99 inc VAT
£140.83 ex VAT
BT57-QK Accuracy International AT Accu-Shot MonopodBT57-QK Accuracy International AT Accu-Shot Monopod
BT57-QK Accuracy International AT Accu-Shot Monopod
The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.
£144.99 inc VAT
£120.83 ex VAT

MDT ACC Internal Forend Weights 2.6 Ibs (5 Pack)MDT ACC Internal Forend Weights 2.6 Ibs (5 Pack)
MDT ACC Internal Forend Weights 2.6 Ibs (5 Pack)
These weights mount on the inside channel of the MDT ACC chassis forend. With the maximum forend capacity of 5 weights, they add 2.6lb to your ACC chassis system. The interior forend weights can be added and removed without removing your barreled action, simply remove the forend cap, slide them into the desired location under the barrel, and screw them in place from the bottom.
£134.99 inc VAT
£112.49 ex VAT
MDT ACC Mirage ShieldMDT ACC Mirage Shield
MDT ACC Mirage Shield
The Mirage Shield/NV Bridge is a dual purpose, precision machined, add-on accessory for the MDT ACC chassis. While the main purpose of the mirage shield is to help mitigate mirage and maintain a clear view of your target in sustained strings of fire, it also provides the ability for hunters and operators to attach a night vision optic to their system. For competitors, the mirage shield also gives you better available surface to control the front of your rifle, without having to grab a hot barrel.
from £138.99 inc VAT
£115.83 ex VAT

MDT Bolt KnobMDT Bolt Knob
New
MDT Bolt Knob
Our MDT Bolt Knob can be installed over top of your existing factory bolt knob, or threaded onto 5/16-24, offering superior grip, ergonomics and style of your rifle. MDT Bolt Knobs are currently available for the following rifles: Universal 5/16-24 thread Remington 700 - Right Handed Tikka T3/T1X Howa 1500 (not compatible with Weatherby) Savage (not compatible with savage tactical or axis bolt knobs) Ruger American Centerfire All hardware included.
£28.99 inc VAT
£24.16 ex VAT
MDT Buttstock Weight - .65 IbsMDT Buttstock Weight - .65 Ibs
MDT Buttstock Weight - .65 Ibs
Add weight to your buttstock to decrease recoil and balance your rifle. This weight mounts in the lower pocket of the MDT ESS, ACC, and SRS V5 buttstocks. The weight and its hardware will add 0.65 lb to your rifle system. Attaching near the bottom of the stock will move your balance point rearward significantly. To install, remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly. 
£54.99 inc VAT
£45.83 ex VAT

MDT M-LOK Arca RailMDT M-LOK Arca Rail
MDT M-LOK Arca Rail
Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.
from £41.99 inc VAT
£34.99 ex VAT
MDT M-LOK Exterior Forend Weights .78Ibs (2 Pack)MDT M-LOK Exterior Forend Weights .78Ibs (2 Pack)
MDT M-LOK Exterior Forend Weights .78Ibs (2 Pack)
Perfect for adding weight and balance to your rifle. Adding weight to a rifle can cut down on recoil, allow one to self-spot their shots and balance their rifle. These weights mount on to the exterior of any chassis or stock that is M-LOK compatible. They mount using standard hardware and M-LOK T-nuts, meaning that you can install and remove them as necessary on your system. Each weight features a QD flush cup to accommodate a sling. A pair of weights and hardware will add 0.78 lb to your chassis/stock.
£54.99 inc VAT
£45.83 ex VAT

MDT M-LOK Rear Aluminium Bag Rider - .21 IbsMDT M-LOK Rear Aluminium Bag Rider - .21 Ibs
MDT M-LOK Rear Aluminium Bag Rider - .21 Ibs
Increase the capabilities of your MDT buttstock. The Rear Bag Rider offers an end user an additional 5" to interface with a rear bag, or compliment multiple shooting positions. A flat, horizontal surface aids in linear recoil and the rounded profile reduces snagging on bags and gear. . Attaches to M-LOK compatible and legacy buttstocks.
£45.99 inc VAT
£38.33 ex VAT
MDT M-LOK Rear Steel Bag Rider - .44 IbsMDT M-LOK Rear Steel Bag Rider - .44 Ibs
MDT M-LOK Rear Steel Bag Rider - .44 Ibs
Increase the capabilities of your MDT buttstock. The Rear Bag Rider offers an end user an additional 5" to interface with a rear bag, or compliment multiple shooting positions. A flat, horizontal surface aids in linear recoil and the rounded profile reduces snagging on bags and gear. Attaches to M-LOK compatible and legacy buttstocks.
£72.99 inc VAT
£60.83 ex VAT

MDT Pistol GripMDT Pistol Grip
MDT Pistol Grip
The MDT pistol grip has been designed to provide superior ergonomics with insight from expert shooters’ experience and preferences. Compatible with MDT Chassis Systems as well as a standard AR-15 interface. The MDT Pistol Grip consists of a one piece reinforced inside core with a comfortable tactile overmold providing maximum comfort and strength. With integrated palm swells to better fit your hand, the MDT Pistol Grip provides outstanding ergonomics for both right and left handed shooters. The MDT Pistol Grip rubber overmold is lightly textured and grooved to guarantee an anti-slip and solid rifle grip.
£28.99 inc VAT
£24.16 ex VAT
MDT Vertical Elite Pistol GripMDT Vertical Elite Pistol Grip
New
MDT Vertical Elite Pistol Grip
The MDT Vertical Grip Elite is the most adjustable grip currently available for the AR-15 grip interface. Compatible with chassis rifles as well as AR10/15 rifles depending on model chosen below. The MDT Vertical Grip ELITE allows the shooter to adjust the distance and angle from the grip to the trigger. Adjusting the grip position enables the shooter to properly position their hand and guarantee a 90 degree trigger press. This will lead to better accuracy and safer trigger manipulation.
£88.99 inc VAT
£74.16 ex VAT

MDT Vertical Premier Pistol Grip
New
MDT Vertical Premier Pistol Grip
Perfect for all long-range shooting disciplines, the MDT Vertical Grip Premier allows fore and aft adjustment to accommodate any hand size. Proper finger and hand placement are crucial for precision marksmanship. Due to varying hand size, marksmen often struggle with finger placement on the trigger. Not anymore. Fore and aft adjustment allows for perfect finger placement, and the vertical grip facilitates a straight pull on the trigger. Easily adjustable.
£47.99 inc VAT
£39.99 ex VAT
Tier One Tactical Bolt Knob
Tier One Tactical Bolt Knob
Our Oversize Bolt Knob allows easier operation even with gloved hands. Made from Aluminium 7075T6 and Hard-coat Anodised for maximum durability. The Tactical Bolt Knob has an M8 internal thread. Please Note: Some gunsmithing may be required to facilitate fitting to some rifles.
£29.99 inc VAT
£24.99 ex VAT